Type: Tri-level Motor Yacht
Location: Middle East
Note: Yard Liquidation
| This is a 34
meter displacement motor yacht, with steel hull and aluminum
superstructure. She is designed with a large body volume
and full beam superstructure, to achieve a maximum of
interior cabin space.
The speed is moderate (12 to 13 knots) as a consequence
of the displacement, but in return, provides the highest
level of comfort with regards to noise, vibration and
ship movements. The yacht is designed following the highest
level of rules and regulation, as well as reaching the
top quality level for this type of vessel.
This type of yacht represents the top level of yacht building
for the international market. The Designer: The “VRIPACK
B.V.” company is based in Sneek Netherlands, and is a
long-term established yacht design company known for very
solid engineering and high end Dutch type of yacht design.
They feature a growing market success, and employ, currently
more than, 90 designers and engineers. Their yachts are
built in Europe, United States, Russia, China, Turkey
and other places.
Sustained cruising speed shall not be less than 12.0 knots
at 90% maximum continuous rating at half load displacement
at sea trial conditions. The range of the yacht shall
be 5.000 nautical miles with 10% consumable left on arrival.
This is based on an average speed of 10 knots including
a 15 % weather allowance. (Resistance augmentation)
| THE STATUS OF THE PROJECT:
Construction started in 2003. The hull (Steel) and the
Superstructure (Aluminum) are finished. The mechanical
and interior still need to be done. The metal work was
executed in a professional way, and good quality. The
respective Lloyds pre-certification has been achieved.
| The Propulsion
System is envisaged that the Yacht be fitted with a twin-screw
propulsion arrangement, consisting of two four stroked
turbo charged, after cooled marine diesel engines.
Preliminary calculations indicate a total brake
power requirement of approximately 708 BKW (950 BHP),
to achieve the specified performance.
Preliminary calculations indicate that two propellers
of approximately 1220 mm diameter turning at 445.5 RPM
(maximum tip speed 28.46 m/sec), can absorb the delivered
power. Propellers are to be manufactured in Ni-Al-Bronze,
and to be of a low noise design with skewed blades.
A trailer is not
included in this sale.
|Please read Motors and
of condition can be made regarding motors, engines or
machinery, whatsoever. A photo may appear of the engine
compartment and machinery, but it is entirely the buyers
responsibility to inspect and determine their actual condition.
* On occasion we receive
unverified information regarding mechanical condition.
Mike Costa @ (401) 732-6300.
and Address Form
necesita comunicarse en español llame al
(401) 732-6300, pregunte por
all your boating needs go to
6% of Sale Price
and Documentation Transfer Preparation and archive
of lost documents or other search
*With a minimum prepay of $95.00
65.00 per hour
Transfer Fee (inside USA)
Transfer Fee (outside USA)
days free storage after winning bid is accepted,
buyers responsibility thereafter.
| Do not assume accessories
or equipment for this vessel may be in storage. This vessel
is being sold as seen. Bid for this boat according to
what she has when you view her.
Disclaimer: The Company offers the details of this
vessel in good faith but cannot guarantee or warrant the
accuracy of this information nor warrant the condition
of the vessel. A Buyer should investigate such details
as the buyer desires validated. This vessel is offered
subject to prior sale, price change, or withdrawal without
All Marine products be they owned or brokered by Certified
Sales, Inc. or its associates, are sold AS-IS, WHERE-IS,
NO WARRANTY OR GUARANTEE EXPRESSED OR IMPLIED. NO
WARRANTY OF MERCHANTABILITY AND FITNESS WHAT-SO-EVER.
No verbal agreements can be applied to the sale of this
Sales Inc. © 2015 All Rights Reserved